JM30 Mulltie Insulation Brick should be used as the first layer of a refractory lining or as back insulating layer behind all other refractory layers in furnaces, bakes, fire channels, refining chambers and heat furnaces, regenerators, gas production plants and conduits, intended furnaces, stress-relieving furnaces, reactor chambers and similar high-temperature industrial devices.
Characters of Kerui JM30 Mullite Insulation Brick
1.High porosity.
2.Low volume density.
3.Good insulation effect.
4.High mechanical intensity.
5.Low thermal conductivity.
Parameters of Kerui JM30 Mullite Insulation Brick
| Index | Volume Density | Reheating Linear Change | Cold Compression Strength | Bending Strength At Normal Temperature | Thermal Conductivity | Al2O3 | SiO2 | حديد2أكسيد الحديد2O3 | |
| – | – | g/cm3 | 1400℃*12h,% | Mpa | Mpa | 350℃w/m·k | % | % | % |
| JM30 | A | 1 | -0.8 | 3 | 1.8 | 0.4 | 72 | 26 | 0.5 |
| JM30 | B | 1.1 | -0.7 | 3.5 | 1.9 | 0.43 | 72 | 26 | 0.5 |
| JM32 | A | 1.1 | -0.8 | 3.6 | 1.9 | 0.43 | 75 | 23 | 0.4 |
| JM32 | B | 1.2 | -0.7 | 3.8 | 2 | 0.46 | 75 | 23 | 0.4 |
